BNDMD - R539, P-NAPHTHOLBENZEIN
- MSDS: BNDMD
- Manufacturer: J T BAKER INC
- Product Name: R539, P-NAPHTHOLBENZEIN
- National Stock Number: 6810-00N029719
Product Identification
Product ID:R539, P-NAPHTHOLBENZEIN
MSDS Date:12/06/1985
FSC:6810
NIIN:00N029719
MSDS Number: BNDMD
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
P-NAPHTHOLBENZEIN
CAS: 145-50-6
Fraction By Weight: 90-100%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:UNKNOWN Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO EFFECTS OF OVEREXPOSURE WERE
DOCUMENTED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:CALL MD. INGEST: IF CONSCIOUS, IMMEDIATELY INDUCE VOMITING.
INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTF RESP. IF
BREATHING DIFFICULT, GIVE OXYGEN. EYES: IMMEDIATELY FLUSH WITH
PLENTY OF WA TER FOR AT LEAST 15 MINUTES. SKIN: FLUSH WITH WATER.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE CLOTHING. WITH CLEAN SHOVEL, CAREFULLY PLACE MATERIAL
INTO CLEAN, DRY CONTAINER AND COVER; REMOVE FROM AREA. FLUSH SPILL
AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA.
Other Precautions:AVOID CONTACT WITH EYES, SKIN, CLOTHING.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE AN
APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME OR DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE EQUIPMENT SHOULD BE CHOSEN WITH
OVERRIDING CONSIDERATION TO MINIMIZE CONTACT WITH CHEMICAL.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:RUST-COLORED CRYSTALS.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE DOCUMENTED.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.